EDM-Wire COMPEEDTM Trademark of SUMITOMO ELECTRIC   COMPEEDTM - The EDM wire that is a Quantum leap forward for high speed precision cutting. COMPEEDTM-wire can be used on all wire EDM machines. Composition (from inside to outside)   Steel: high tensile strength for greater accuracy and fewer wire breaks Copper: high conductivity for faster cutting speed Diffused brass surface layer: more efficient electrical discharge Tension vs. Temperature in the Work Zone   Graph shows COMPEEDTM-wire compared to hard (H) and extrahard (EH) standard brass wire. Advantages better cutting parallelism faster cutting speeds fewer wire breaks ideally suited for difficult to machine materials, e.g. graphite, copper, aluminium etc. plications where COMPEEDTM-wire excels Technical Specifications   CSX-10A CSX-15A CSX-20A CSX-25A CSX-30A Wire Dia. mm 0,10 0,15 0,20 0,25 0,30 Tensile Strength +/- N/mm2 1.000 900 800 800 800 Break Load +/- N 7,50 15,0 19,50 30,62 44,31 Elongation % > 0,8 > 1,0 0,5-2,0 0,5-2,0 0,5-2,0 Length m/kg 15.291 6.793 3.821 2.446 1.698 Weight kg/1.000m 0,0654 0,1472 0,2617 0,4089 0,5888 Tolerance of Dia. mm +0/-0,002 +0/-0,002 +0/-0,002 +0/-0,002 +0/-0,002 Conductivity IACS 50% 50% 50% 50% 50% Spools CSX-10A CSX-15A CSX-20A CSX-25A CSX-30A K 100 x         K 125   x x x x K 160     x x x K 200     x x x P5     x x x P10       x   P15       x   Specification subject to change without notice Packing On plastic spools, packed in plastic and cardboard boxes Size Standard Wire Weight per Spool (kg) Spools per Carton K 100*) DIN 46399 1,0 6 K 125 DIN 46399 3,0 4 K 160 DIN 46399 6,0 2 K 200 DIN 46399 15,0 1 P5 JIS 6,0 4 P10 JIS 10,0 1 P15 JIS 20,0 1 *) Ø 0,10 mm only EXCLUSIVE WORLDWIDE SALES* * and through authorized distributors

EDM-Wire   EDM-Wire STARCUT   Coated EDM-Wire   EDM-Wire GAMMA   EDM-Wire COMPEED®   Filtration   Consumables, Accessories, etc.   Metallic Electrodes   Graphite   Replacement/Wear Parts Rothe Erde